学术动态
The methodology has been outlined to correctly identify the high-bandwidth devices that are able to deliver the lowest noise voltage-amplification from the receiving terahertz antenna or photodiode current sources. We further show that to achieve the lowest noise levels and hence highest SNR values, amplifier input capacitance must be minimized requiring the amplifier and detection circuitry to be carefully integrated onto a single PCB. We validate a useful technique to minimize feedback parasitic capacitance, Cf, and demonstrate a TIA with a peak gain of 100 M, 0.5 MHz bandwidth, and a SNR of 23 dB and outline the steps required to increase this SNR to >50 dB. Employing this TIA on a 1550 nm fiber-based ASOPS system realizes a 700 mV, 26 dB SNR, single-scan signal from the 8 nA peak/peak antenna source and removes the requirement for an additional data acquisition trigger signal. Real time, subsecond terahertz data collection is possible at a signal to noise ratio of 30 dB averaging over 16 scans. Finally, we acknowledge that the limitation of the technique to maximize the amplifier bandwidth is due to the high dielectric constant (Dk = 9) of the feedback resistor substrate, and the use of a low dielectric constant material (Dk < 2.5) would remove this.
Copyright 首都师范大学太赫兹光电子学教育部重点实验室版权所有
地址:北京市西三环北路105号 100048 E-mail: info@cnu.edu.cn
京ICP备05082108号-1 京公网安备:110402430068号